Victoria and Vancouver Island, BC · Q3 2026
Whole home renovation cost in Victoria and Vancouver Island
Paint, floors, lighting, and light kitchen and bath updates. The figures below are modelled for Victoria and Vancouver Island, BC using our 1.10× regional cost multiplier, on a detached home built 1960-1989 at a mid-range finish.
Typical planning budget
$43,550 to $70,150
Typical $52,400 · includes 14% contingency
Before contingency
Why Victoria and Vancouver Island differs
Victoria and Vancouver Island prices about 10% above Ottawa, which is the baseline our regional model is anchored to.
- Regional multiplier
- 1.10×
- Versus Ottawa
- +10%
- Province
- British Columbia
- Sales tax on services
- GST (5%)
Regional multipliers are anchored to Ottawa at 1.00 and scaled using Statistics Canada's Residential Renovation Price Index and Building Construction Price Index movements by census metropolitan area, then cross-checked against published contractor rate ranges. They are planning-level adjustments, not surveyed local quotes.
Areas this covers
Victoria and Vancouver Island, BC is modelled as a single labour market, so these municipalities share the same cost multiplier:
- Victoria
- Saanich
- Nanaimo
- Courtenay
Somewhere else in British Columbia? Compare every British Columbia region.
Cost by finish level in Victoria and Vancouver Island
Finish level moves the number more than almost anything else you control. All three rows use the same Victoria and Vancouver Island multiplier and the same scope.
| Finish | Low | Typical | High |
|---|---|---|---|
| BudgetStock materials, simple details, value fixtures | $31,600 | $38,000 | $50,900 |
| Mid-rangeCommon homeowner choice: durable materials, better fixtures | $43,550 | $52,400 | $70,150 |
| PremiumHigh-end materials, custom detailing, designer fixtures | $63,600 | $76,550 | $102,550 |
Cost by size in Victoria and Vancouver Island
Typical all-in planning budgets at three representative sizes, mid-range finish.
| Size | Low | Typical | High |
|---|---|---|---|
| 1,200 sq ft | $34,650 | $41,800 | $55,950 |
| 1,800 sq ft | $43,550 | $52,400 | $70,150 |
| 2,600 sq ft | $55,350 | $66,700 | $89,400 |
Where the money goes
The $52,400 typical figure for Victoria and Vancouver Island, broken into the lines a contractor quote should also separate.
| Category | Low | Typical | High |
|---|---|---|---|
| Materials | $16,900 | $20,300 | $27,200 |
| Labour | $17,000 | $20,500 | $27,500 |
| Demolition and disposal | $2,450 | $2,950 | $3,900 |
| Permit and design allowance | $1,850 | $2,200 | $2,950 |
| Subtotal | $38,200 | $45,950 | $61,550 |
| Contingency (14%) | $5,350 | $6,450 | $8,600 |
| Total planning budget | $43,550 | $52,400 | $70,150 |
Compared with the rest of British Columbia
Same project, same scope and finish, priced against every other British Columbia region we model.
| Region | Multiplier | Typical | vs Victoria and Vancouver Island |
|---|---|---|---|
| Victoria and Vancouver Island (this page) | 1.10× | $52,400 | — |
| Vancouver and Lower Mainland | 1.18× | $56,200 | +7% |
| Interior and northern B.C. | 1.02× | $48,500 | -7% |
Permits in British Columbia
Building permits are issued by your municipality or regional district under the BC Building Code.
Commonly triggered by this project
- New electrical circuits. Electrical work in Ontario is governed by the Electrical Safety Authority (ESA). A notification, permit, or licensed electrician is normally required.
Hiring in British Columbia
B.C. does not license renovation contractors. A BC Housing residential builder licence is only required for new homes and substantial reconstruction covered by home warranty insurance.
Trades that must be certified
- Electrical: Electrical work for hire requires a Technical Safety BC contractor licence and a permit.
- Gas: Gas fitting requires a licensed gas contractor and a gas permit.
Costs people forget on this project
Included as allowances above. Check any quote covers them too.
- Drywall repair and skim coating on older walls
- Trim and door adjustments after new flooring
- Electrical corrections found when replacing fixtures
- Painting preparation on unprimed or damaged surfaces
- Multiple disposal bins across phases
- Temporary accommodation or storage
Typical schedule: 4 to 10 weeks depending on how much is done at once.
Questions homeowners ask
- Is it cheaper to refresh everything at once?
- Usually yes. Doing paint, flooring, and trim in one mobilization avoids repeated setup, protection, and disposal costs, and reduces the risk of mismatched finishes.
- Should I refresh before selling?
- Paint, flooring, and lighting tend to be the lowest-cost updates that affect how a home shows. Compare the cost against the transaction costs in the Renovate vs. Move calculator.