Montreal, QC · Q3 2026
Windows and doors renovation cost in Montreal
Unit quality, installation method, and opening changes. The figures below are modelled for Montreal, QC using our 0.98× regional cost multiplier, on a detached home built 1960-1989 at a mid-range finish.
Typical planning budget
$11,350 to $18,250
Typical $13,700 · includes 17% contingency
Before contingency
Why Montreal differs
Montreal prices about 2% below Ottawa, which is the baseline our regional model is anchored to.
- Regional multiplier
- 0.98×
- Versus Ottawa
- -2%
- Province
- Quebec
- Sales tax on services
- GST + QST (14.975%)
Regional multipliers are anchored to Ottawa at 1.00 and scaled using Statistics Canada's Residential Renovation Price Index and Building Construction Price Index movements by census metropolitan area, then cross-checked against published contractor rate ranges. They are planning-level adjustments, not surveyed local quotes.
Areas this covers
Montreal, QC is modelled as a single labour market, so these municipalities share the same cost multiplier:
- Montréal
- Laval
- Longueuil
- Brossard
Somewhere else in Quebec? Compare every Quebec region.
Cost by finish level in Montreal
Finish level moves the number more than almost anything else you control. All three rows use the same Montreal multiplier and the same scope.
| Finish | Low | Typical | High |
|---|---|---|---|
| BudgetStock materials, simple details, value fixtures | $7,950 | $9,600 | $12,850 |
| Mid-rangeCommon homeowner choice: durable materials, better fixtures | $11,350 | $13,700 | $18,250 |
| PremiumHigh-end materials, custom detailing, designer fixtures | $16,900 | $20,350 | $27,300 |
Cost by size in Montreal
Typical all-in planning budgets at three representative sizes, mid-range finish.
| Size | Low | Typical | High |
|---|---|---|---|
| 3 windows | $6,500 | $7,800 | $10,450 |
| 8 windows | $11,350 | $13,700 | $18,250 |
| 15 windows | $18,150 | $21,900 | $29,250 |
Where the money goes
The $13,700 typical figure for Montreal, broken into the lines a contractor quote should also separate.
| Category | Low | Typical | High |
|---|---|---|---|
| Materials | $5,600 | $6,750 | $9,000 |
| Labour | $3,650 | $4,400 | $5,850 |
| Demolition and disposal | $450 | $550 | $750 |
| Permit and design allowance | $0 | $0 | $0 |
| Subtotal | $9,700 | $11,700 | $15,600 |
| Contingency (17%) | $1,650 | $2,000 | $2,650 |
| Total planning budget | $11,350 | $13,700 | $18,250 |
Compared with the rest of Quebec
Same project, same scope and finish, priced against every other Quebec region we model.
| Region | Multiplier | Typical | vs Montreal |
|---|---|---|---|
| Montreal (this page) | 0.98× | $13,700 | — |
| Quebec City | 0.93× | $13,000 | -5% |
| Other Quebec | 0.91× | $12,650 | -8% |
Permits in Quebec
Renovation permits are issued by your municipality or borough. Quebec also applies the Construction Code province-wide.
At this scope our model does not flag a permit trigger, but that is not a ruling. Only your municipality can confirm what applies to your property.
Hiring in Quebec
Quebec is the strictest province: every construction and renovation contractor must hold a valid Régie du bâtiment du Québec (RBQ) licence. Hiring an unlicensed contractor is illegal.
Trades that must be certified
- Electrical: Electrical work must be done by an RBQ-licensed electrical contractor, normally a CMEQ member.
- Plumbing and heating: Plumbing and heating work must be done by an RBQ-licensed contractor, normally a CMMTQ member.
Costs people forget on this project
Included as allowances above. Check any quote covers them too.
- Flashing, air sealing, and spray foam at each opening
- Interior casing and exterior capping
- Structural header work when openings change
- Scaffolding for upper floors
- Disposal of old units and glass
- Permit review when openings are added or enlarged
Typical schedule: 1 to 5 days for a typical package.
Questions homeowners ask
- Retrofit or full-frame installation?
- Retrofit keeps the existing frame and costs less. Full-frame removes everything to the studs and lets the installer correct rot, insulation, and flashing problems, which matters in older homes.
- Do window replacements need a permit?
- Same-size replacement often does not, but enlarging or adding an opening usually does because it affects structure. Confirm locally before ordering units.