Edmonton, AB · Q3 2026
Whole home renovation cost in Edmonton
Paint, floors, lighting, and light kitchen and bath updates. The figures below are modelled for Edmonton, AB using our 0.99× regional cost multiplier, on a detached home built 1960-1989 at a mid-range finish.
Typical planning budget
$39,150 to $63,250
Typical $47,250 · includes 14% contingency
Before contingency
Why Edmonton differs
Edmonton prices about 1% below Ottawa, which is the baseline our regional model is anchored to.
- Regional multiplier
- 0.99×
- Versus Ottawa
- -1%
- Province
- Alberta
- Sales tax on services
- GST (5%)
Regional multipliers are anchored to Ottawa at 1.00 and scaled using Statistics Canada's Residential Renovation Price Index and Building Construction Price Index movements by census metropolitan area, then cross-checked against published contractor rate ranges. They are planning-level adjustments, not surveyed local quotes.
Areas this covers
Edmonton, AB is modelled as a single labour market, so these municipalities share the same cost multiplier:
- Edmonton
- St. Albert
- Sherwood Park
- Spruce Grove
Somewhere else in Alberta? Compare every Alberta region.
Cost by finish level in Edmonton
Finish level moves the number more than almost anything else you control. All three rows use the same Edmonton multiplier and the same scope.
| Finish | Low | Typical | High |
|---|---|---|---|
| BudgetStock materials, simple details, value fixtures | $28,450 | $34,150 | $45,850 |
| Mid-rangeCommon homeowner choice: durable materials, better fixtures | $39,150 | $47,250 | $63,250 |
| PremiumHigh-end materials, custom detailing, designer fixtures | $57,150 | $68,800 | $92,300 |
Cost by size in Edmonton
Typical all-in planning budgets at three representative sizes, mid-range finish.
| Size | Low | Typical | High |
|---|---|---|---|
| 1,200 sq ft | $31,200 | $37,600 | $50,400 |
| 1,800 sq ft | $39,150 | $47,250 | $63,250 |
| 2,600 sq ft | $49,700 | $59,950 | $80,300 |
Where the money goes
The $47,250 typical figure for Edmonton, broken into the lines a contractor quote should also separate.
| Category | Low | Typical | High |
|---|---|---|---|
| Materials | $15,200 | $18,300 | $24,500 |
| Labour | $15,300 | $18,500 | $24,800 |
| Demolition and disposal | $2,200 | $2,650 | $3,550 |
| Permit and design allowance | $1,650 | $2,000 | $2,650 |
| Subtotal | $34,350 | $41,450 | $55,500 |
| Contingency (14%) | $4,800 | $5,800 | $7,750 |
| Total planning budget | $39,150 | $47,250 | $63,250 |
Compared with the rest of Alberta
Same project, same scope and finish, priced against every other Alberta region we model.
| Region | Multiplier | Typical | vs Edmonton |
|---|---|---|---|
| Edmonton (this page) | 0.99× | $47,250 | — |
| Calgary | 1.02× | $48,500 | +3% |
| Other Alberta | 0.96× | $45,650 | -3% |
Permits in Alberta
Building permits are issued by your municipality or an accredited agency under the Alberta Building Code.
Commonly triggered by this project
- New electrical circuits. Electrical work in Ontario is governed by the Electrical Safety Authority (ESA). A notification, permit, or licensed electrician is normally required.
Hiring in Alberta
Alberta requires a prepaid contracting business licence for most residential renovation contractors who take payment before work is complete. It is verifiable through Service Alberta.
Trades that must be certified
- Electrical: Electrical work requires a permit and a certified journeyperson electrician.
- Gas: Gas work requires a certified gas fitter and a gas permit.
Costs people forget on this project
Included as allowances above. Check any quote covers them too.
- Drywall repair and skim coating on older walls
- Trim and door adjustments after new flooring
- Electrical corrections found when replacing fixtures
- Painting preparation on unprimed or damaged surfaces
- Multiple disposal bins across phases
- Temporary accommodation or storage
Typical schedule: 4 to 10 weeks depending on how much is done at once.
Questions homeowners ask
- Is it cheaper to refresh everything at once?
- Usually yes. Doing paint, flooring, and trim in one mobilization avoids repeated setup, protection, and disposal costs, and reduces the risk of mismatched finishes.
- Should I refresh before selling?
- Paint, flooring, and lighting tend to be the lowest-cost updates that affect how a home shows. Compare the cost against the transaction costs in the Renovate vs. Move calculator.