Saskatoon and Regina, SK · Q3 2026
Furnace renovation cost in Saskatoon and Regina
Equipment, venting, and the gas work behind it. The figures below are modelled for Saskatoon and Regina, SK using our 0.94× regional cost multiplier, on a detached home built 1960-1989 at a mid-range finish.
Typical planning budget
$4,200 to $6,800
Typical $5,050 · includes 12% contingency
Before contingency
Why Saskatoon and Regina differs
Saskatoon and Regina prices about 6% below Ottawa, which is the baseline our regional model is anchored to.
- Regional multiplier
- 0.94×
- Versus Ottawa
- -6%
- Province
- Saskatchewan
- Sales tax on services
- GST (5%)
Regional multipliers are anchored to Ottawa at 1.00 and scaled using Statistics Canada's Residential Renovation Price Index and Building Construction Price Index movements by census metropolitan area, then cross-checked against published contractor rate ranges. They are planning-level adjustments, not surveyed local quotes.
Areas this covers
Saskatoon and Regina, SK is modelled as a single labour market, so these municipalities share the same cost multiplier:
- Saskatoon
- Regina
- Warman
- White City
Somewhere else in Saskatchewan? Compare every Saskatchewan region.
Cost by finish level in Saskatoon and Regina
Finish level moves the number more than almost anything else you control. All three rows use the same Saskatoon and Regina multiplier and the same scope.
| Finish | Low | Typical | High |
|---|---|---|---|
| BudgetStock materials, simple details, value fixtures | $3,000 | $3,650 | $4,850 |
| Mid-rangeCommon homeowner choice: durable materials, better fixtures | $4,200 | $5,050 | $6,800 |
| PremiumHigh-end materials, custom detailing, designer fixtures | $6,100 | $7,400 | $9,900 |
Cost by size in Saskatoon and Regina
Typical all-in planning budgets at three representative sizes, mid-range finish.
| Size | Low | Typical | High |
|---|---|---|---|
| 1,100 sq ft | $3,750 | $4,600 | $6,100 |
| 1,800 sq ft | $4,200 | $5,050 | $6,800 |
| 3,000 sq ft | $4,850 | $5,900 | $7,900 |
Where the money goes
The $5,050 typical figure for Saskatoon and Regina, broken into the lines a contractor quote should also separate.
| Category | Low | Typical | High |
|---|---|---|---|
| Materials | $1,900 | $2,250 | $3,050 |
| Labour | $1,500 | $1,800 | $2,400 |
| Demolition and disposal | $200 | $250 | $300 |
| Permit and design allowance | $150 | $200 | $300 |
| Subtotal | $3,750 | $4,500 | $6,050 |
| Contingency (12%) | $450 | $550 | $750 |
| Total planning budget | $4,200 | $5,050 | $6,800 |
Compared with the rest of Saskatchewan
Same project, same scope and finish, priced against every other Saskatchewan region we model.
| Region | Multiplier | Typical | vs Saskatoon and Regina |
|---|---|---|---|
| Saskatoon and Regina (this page) | 0.94× | $5,050 | — |
| Other Saskatchewan | 0.91× | $4,950 | -2% |
Permits in Saskatchewan
Building permits are issued by your municipality under the National Building Code as adopted by Saskatchewan.
Commonly triggered by this project
- Gas appliance work. Gas work must be performed by a licensed technician and may require a permit.
- HVAC changes. Adding or relocating heating, cooling, or ventilation may require a permit and load calculations.
Hiring in Saskatchewan
Saskatchewan does not license renovation contractors. Check the business registration, WCB coverage, and liability insurance directly.
Trades that must be certified
- Electrical and gas: Electrical and gas work requires a licensed contractor and a TSASK permit.
Costs people forget on this project
Included as allowances above. Check any quote covers them too.
- Chimney liner or new venting on a condensing conversion
- Gas line resizing when adding load
- Condensate drain routing and pumps
- Electrical work for a new disconnect or dedicated circuit
- Ductwork undersized for the new blower
- Asbestos-wrapped ducting in pre-1990 homes
Typical schedule: 1 to 2 days for a straight replacement.
Questions homeowners ask
- Why is my furnace quote higher than the advertised price?
- Advertised prices are usually the equipment and a straightforward swap. The lines that move a quote are venting, gas line resizing, condensate drainage, electrical, and ductwork changes. Ask for those to be itemised rather than bundled, because a quote that omits them is not cheaper, it is incomplete.
- Do I need a permit to replace a furnace?
- Yes. Replacing a gas appliance is permitted and inspected work in every province, which is why the permit line above is never zero. A reputable installer pulls it as part of the job. If a contractor offers to skip the permit, that is a reason to end the conversation, not a saving.
- Should I replace the air conditioner at the same time?
- Often yes, if both are near end of life. The indoor coil and blower are shared, so doing both together avoids paying twice for the same access and refrigerant work, and a matched system runs more efficiently than a mismatched one. Price them separately first so you can see what the combined discount actually is.
- Is a heat pump a better choice than a furnace?
- In much of Canada a cold-climate heat pump now handles most of the heating season, with the furnace or electric backup covering the coldest weeks. It costs more up front and attracts the largest rebates of any upgrade on this site. Whether it pencils out depends on your electricity and gas rates, so check the rebates page before deciding.