New Brunswick · Q3 2026
Furnace renovation cost in All of New Brunswick
Equipment, venting, and the gas work behind it. The figures below are modelled for New Brunswick using our 0.89× regional cost multiplier, on a detached home built 1960-1989 at a mid-range finish.
Typical planning budget
$4,000 to $6,350
Typical $4,750 · includes 12% contingency
Before contingency
Why All of New Brunswick differs
All of New Brunswick prices about 11% below Ottawa, which is the baseline our regional model is anchored to.
- Regional multiplier
- 0.89×
- Versus Ottawa
- -11%
- Province
- New Brunswick
- Sales tax on services
- HST (15%)
Regional multipliers are anchored to Ottawa at 1.00 and scaled using Statistics Canada's Residential Renovation Price Index and Building Construction Price Index movements by census metropolitan area, then cross-checked against published contractor rate ranges. They are planning-level adjustments, not surveyed local quotes.
Areas this covers
New Brunswick is modelled as a single labour market, so these municipalities share the same cost multiplier:
- Moncton
- Saint John
- Fredericton
- Dieppe
Somewhere else in New Brunswick? Compare every New Brunswick region.
Cost by finish level in All of New Brunswick
Finish level moves the number more than almost anything else you control. All three rows use the same All of New Brunswick multiplier and the same scope.
| Finish | Low | Typical | High |
|---|---|---|---|
| BudgetStock materials, simple details, value fixtures | $2,850 | $3,400 | $4,600 |
| Mid-rangeCommon homeowner choice: durable materials, better fixtures | $4,000 | $4,750 | $6,350 |
| PremiumHigh-end materials, custom detailing, designer fixtures | $5,800 | $6,950 | $9,350 |
Cost by size in All of New Brunswick
Typical all-in planning budgets at three representative sizes, mid-range finish.
| Size | Low | Typical | High |
|---|---|---|---|
| 1,100 sq ft | $3,600 | $4,250 | $5,750 |
| 1,800 sq ft | $4,000 | $4,750 | $6,350 |
| 3,000 sq ft | $4,600 | $5,550 | $7,450 |
Where the money goes
The $4,750 typical figure for All of New Brunswick, broken into the lines a contractor quote should also separate.
| Category | Low | Typical | High |
|---|---|---|---|
| Materials | $1,800 | $2,150 | $2,850 |
| Labour | $1,400 | $1,700 | $2,250 |
| Demolition and disposal | $200 | $200 | $300 |
| Permit and design allowance | $150 | $200 | $250 |
| Subtotal | $3,550 | $4,250 | $5,650 |
| Contingency (12%) | $450 | $500 | $700 |
| Total planning budget | $4,000 | $4,750 | $6,350 |
Permits in New Brunswick
Building permits are issued by your municipality or regional service commission.
Commonly triggered by this project
- Gas appliance work. Gas work must be performed by a licensed technician and may require a permit.
- HVAC changes. Adding or relocating heating, cooling, or ventilation may require a permit and load calculations.
Hiring in New Brunswick
New Brunswick does not license renovation contractors. Verify business registration, WorkSafeNB coverage, and liability insurance yourself.
Trades that must be certified
- Electrical and plumbing: Electrical and plumbing work requires a certified journeyperson and a permit.
Costs people forget on this project
Included as allowances above. Check any quote covers them too.
- Chimney liner or new venting on a condensing conversion
- Gas line resizing when adding load
- Condensate drain routing and pumps
- Electrical work for a new disconnect or dedicated circuit
- Ductwork undersized for the new blower
- Asbestos-wrapped ducting in pre-1990 homes
Typical schedule: 1 to 2 days for a straight replacement.
Questions homeowners ask
- Why is my furnace quote higher than the advertised price?
- Advertised prices are usually the equipment and a straightforward swap. The lines that move a quote are venting, gas line resizing, condensate drainage, electrical, and ductwork changes. Ask for those to be itemised rather than bundled, because a quote that omits them is not cheaper, it is incomplete.
- Do I need a permit to replace a furnace?
- Yes. Replacing a gas appliance is permitted and inspected work in every province, which is why the permit line above is never zero. A reputable installer pulls it as part of the job. If a contractor offers to skip the permit, that is a reason to end the conversation, not a saving.
- Should I replace the air conditioner at the same time?
- Often yes, if both are near end of life. The indoor coil and blower are shared, so doing both together avoids paying twice for the same access and refrigerant work, and a matched system runs more efficiently than a mismatched one. Price them separately first so you can see what the combined discount actually is.
- Is a heat pump a better choice than a furnace?
- In much of Canada a cold-climate heat pump now handles most of the heating season, with the furnace or electric backup covering the coldest weeks. It costs more up front and attracts the largest rebates of any upgrade on this site. Whether it pencils out depends on your electricity and gas rates, so check the rebates page before deciding.